AVTOCOL PUTTY SOFT is a two-component polyester putty, designed to fill and repair larger and smaller uneven metal surfaces.


AVTOCOL PUTTY SOFT is grey-white in colour, dries quickly and is easy to sand. it provides a nice and smooth surface.


Mix the putty and hardener in a ratio of 100 : 2, at lower temperatures in a ratio 100 : 3. Mix the mixture well and apply it to a metal substrate at about 20 °C. Mixed putty is suitable for application from 5 to 10 minutes. Apply the putty with a spatula on a dry, sanded and cleaned substrate. After 30 to 60 minutes, sand the surface with sandpaper 60 – 80, then 150 and then smooth with sandpaper 280 – 360. For a better finished look of the repaired surface we recommend application of one or two coats of TESSAROL universal UNI primer. Finally, protect the repaired surface with a TESSAROL Metal Express coating.


Safety data sheet:

Packaging units:

0.65 l

  • exterior surfaces
  • interior surfaces
  • metal surfaces
application •    spatula
drying 30 – 60 min
number of coats 1–2x (recommended)
coverage in one coat depending on the size of the defect
storage from +5 °C
to +35 °C